From mp@hep.ucl.ac.uk Mon Jan 19 19:57:55 1998
Date: Mon, 19 Jan 1998 15:15:49 GMT
From: "MARTIN POSTRANECKY,UCL-PHYSICS DEP,HEPP GROUP,GOWER ST,LONDON WC1E
     6BT,TEL:(00-44)-[0]171-419 3453,FAX:[0]171-380 7145" <mp@hep.ucl.ac.uk>
To: meh@ax8.hep.ucl.ac.uk, mp@ax8.hep.ucl.ac.uk

From:	UCLVA::IAV          "Ian A. Vine ( UCL UK, 071-387-7050 ex3450 )"  
			     9-AUG-1994 / 10-AUG-1994 / 31-AUG-1994

Subj:	MULTI-CRATE ROCTEST 
===========================

        At last the multi crate test is here ( perhaps ). All the stuff is
in the directory :

	USERDISK:[UCL.ZTEST]		on ZUKVS3
	====================

	There is a setup file.

	To run multicrate type ZTEST 
			  ==========

	This uses link 0, if you need to change this you will have to edit 
the file ztest.com.

        As the test is running you will get several messages 
eg. card crate test starting; 

	press SPACE BAR for status, CR RETURN to end
	============================================

Test start   info 1 0 0                    TP 1 crate 1
Test start   info 2 0 0                    TP 1 crate 1
Test start   info 3 0 0                    TP 1 crate 1
Test start   info 4 0 0                    TP 1 crate 1
Test start   info 5 0 0                    TP 1 crate 1
Test start   info 6 0 0                    TP 1 crate 1
Test start   info 7 0 0                    TP 1 crate 1
Test start   info 8 0 0                    TP 1 crate 1
Test start   info 9 0 0                    TP 1 crate 1
Test start   info 10 0 0                   TP 1 crate 1
Test complete                              TP 1 crate 1

	The above is taken from a single crate test, with the multicrate
you shoudl get similar messages from each crate. 

	When you have received a " Test complete " message from each crate 
	press CR RETURN to end the test and display the results.
	===============
( this can be done at anytime, but obviously the test will not have done 
as many loops ).
	

	The table columns are :
	=======================

	crate number
	LTC serial number
	FAIL ( if there are errors in any card in a crate this 
		is indicated here )
	number of loops
	and then 19 columns for slots 2 to 20 in each crate.

	If a zcard is present in a slot this will be indicated by
	=========================================================

	o   for an old zcard and
	n   for a new zcard.

Any errors are indicated by a number immeadiately following the o or n.




	Table extract :
	===============

	+-----+----+----+-----+----+----+----+----+----+
	|Crate|LTC |    |     |          
	|Num  |Ser.|    |     +----+----+----+----+----+
	|     |Num.|FAIL|loops|  2 |  3 |  4 |  5 |  6 |
	+-----+----+----+-----+----+----+----+----+----+
	| 1   |  5 |FAIL|  10 |    |    |    |    |n999|
	| 2   |  0 |    |   0 |    |    |    |    |    |


	The above shows a new zcard in crate 1 slot 6 with 999 errors. 
The maximum number of errors shown is limited to 999, so if you see an 
error count of 999, it is probably safe to assume there are more than 
999 errors.

	Another point, when you run the test, it puts your terminal into 
132 column mode to fit the table on the screen.

Ian



!
!	To run IAV's & JBL's old MULTICRATE ROCTEST 
!	===========================================
!
!	IAV,  9 August 1994
!	IAV, 31 August 1994
!
!	Run :
!	=====
!
!	@MULTICRATESETUP_OLD.COM
!
!	first,  and
$!
$!	follow by :
$!	===========
$!
$!	ZTEST		for multi-crate / multi-transputer version
$!	
S!	or by :
$!	=======
$!
$!	ZTEST1		for a single-transputer
$!
$	exit




$!
$!	SETUP FOR new MULTI-CRATE ROCTEST , VERSION 1.0 or 1.1
$!	======================================================
$!
$!	++++++++++++++++++++++++++++
$!	!!!  NEW - FOR UCL ONLY  !!!
$!	++++++++++++++++++++++++++++
$! 
$!	IAV - UCL,	 9 Dec. 1994
$!	MP  - UCL,	11 Dec. 1994
$!			12 Dec. 1994
$!
$!	The OLD setup file you have tries to setup the multi-crate test 
$!	in my directory.
$!
$!	All production code is now on the zeus disk :
$!	---------------------------------------------
$!
$!	To setup the ORIGINAL VERSION ( Z-LTCC in slot 1 ) call :
$!	=========================================================
$!
$!	@disk$z1:[zeus_online.ctd_online3.multiz.v1_0]setup
$!
$!	for version 1.0  ( NB.: THIS WILL NOT WORK IN CURRENT SETUP )
$!	-------------------------------------------------------------
$!
$!	OR
$!
$!	@disk$z1:[zeus_online.ctd_online3.multiz.v1_1]setup
$!
$!	for version 1.1
$!	---------------
$!
$!	All the symbols will be setup for you.
$!
$!      follow by :
$!      ===========
$!
$!      ZTEST           for multi-crate / multi-transputer version
$!
$!      or by :
$!      =======
$!
$!      ZTEST1          for a single-transputer
$!
$	exit